Black annealing
A contrasting mark with no loss of thickness and no damage to the oxide film. The geometry of the part is unchanged.
Stainless steel, titanium, tools, medical devices
INDUSTRIAL MARKING
Marking to
GOST / ISO
Serial numbers, QR and DataMatrix codes, technical nameplates, instrument panels. The mark cannot be wiped off with solvent and cannot peel away — the beam alters the structure of the metal, so the identification lasts as long as the item itself.
by area
AND RUN SIZE
from 1 day
LEAD TIME PER BATCH
contract
LONG-TERM SUPPLY
WORKSHOP CAPABILITIES
- WORKING LENSES
- 110 · 200 · 300 MM
- LARGE PANELS
- IN TILED PASSES
- ROTARY TOOLING
- 360° CHUCK
- ON-SITE VISIT
- IF IT CANNOT BE MOVED
§ 01 —— WHAT WE MARK
Marking methods
The method is chosen for the material and the client’s requirement: in one case scanner readability matters, in another abrasion resistance, in another that the geometry of the part stays unchanged.
Deep engraving
Relief a few tenths of a millimetre deep — still legible after the surface has worn or been painted over.
Tooling, stamps, load-bearing parts, nameplates
Coating removal
We take the anodised layer or the powder coating down to the base metal — the mark comes out light and contrasting.
Housings, instrument panels, painted metal
Codes and serial numbers
DataMatrix, QR, sequential numbering of the batch taken from your spreadsheet. We check scanner readability on a sample.
Traceability, item passport, warehouse
Stainless steel, titanium, aluminium and anodised aluminium, brass, bronze, painted and chromed metal, engineering plastics, ceramics.
Contract, invoice, e-invoice, acceptance certificates. We work under treasury and departmental contracts and take part in tenders. 50% paid in advance per batch.
We do not apply or restore the factory serial numbers of luxury brands on copies of their products. We do not work with PVC or vinyl — heating releases chlorine.
§ 02 —— BATCH PROCEDURE
From drawing to certificate
- 01 You send us a drawing or a sample part and the marking requirement
- 02 We select the marking method for the material and quote by area and run size
- 03 A control sample, then a scanner check that the code reads
- 04 Contract, invoice, 50% paid in advance
- 05 The batch runs in flow, with sequential numbering from your spreadsheet
- 06 Quality control, packing, certificates and e-invoices. For a long-term supply arrangement — a fixed price for the period
Frequently asked questions
Won’t marking weaken the part or start corrosion? −
With black annealing no metal is removed: the beam changes the colour of the surface without breaking the oxide film or altering the geometry of the part. This is how we mark stainless steel, titanium, tooling and medical devices. If your specification calls for relief, that is deep engraving — we tell you in advance what depth we will go to.
Will the code definitely read on a scanner? −
We check that the DataMatrix or QR code reads with a scanner on the control sample — before the batch goes into production. If the code will not scan at your site, we change its size and the marking method until it does. Sequential numbering is taken straight from your spreadsheet; nobody keys the numbers in by hand.
Will the mark survive solvent, and will it survive painting? −
It is neither paint nor a sticker, and solvent will not take it off. If the part is painted afterwards or works under abrasion, we use deep engraving — a relief a few tenths of a millimetre deep stays legible after the surface wears and under a coat of paint. We choose the marking method to suit the material and the operating conditions.
We have a two-metre panel and a machine bed that cannot be removed. What now? −
Our working lenses are 110, 200 and 300 mm, and large panels are engraved in stitched sections — size alone is no obstacle. If the item cannot be moved, we come to the site and work there. Send photos and dimensions and we will tell you which option is cheaper.
The part is plastic — will you take it on? −
We mark engineering plastics and ceramics just as we do metals: stainless steel, titanium, aluminium and anodised aluminium, brass, bronze, painted and chromed metal. What we do not take is PVC or any vinyl-containing material — heating it releases chlorine, which is harmful both to people and to the machine’s optics. Tell us the grade of plastic and we will answer straight away.
We need a permanent contractor, not a one-off order. Do you work that way? −
Yes — for a long-term arrangement we fix the price for the period rather than recalculating every batch. The paperwork is standard: contract, invoice, electronic VAT invoices, acceptance certificates, including treasury and departmental contracts, and we take part in tenders. A batch carries a 50% prepayment, and the lead time per batch is from one working day.
REQUEST A QUOTE
Send us the drawing and we’ll quote it
/tablichki
Signs and interiors
Wayfinding and signage matched to the interior, not print on film.
/3d-gravirovka
3D engraving and dies
Deep relief rather than a surface mark — for embossing and impressions.
/merch-tirazh
Merch and brand production runs
Limited series, drops, welcome packs, branding on the product itself.